Description
Stud bolts Big Racing + Streetrace
High quality and high resistance cylinder studs for the Stage6 77cc / 88cc Big Racing and Streetrace cylinder series.
The threads are rolled (not cut), resulting in a clean, very precise high strength thread. The cylinder stud bolts are also heat-treated to guarantee the necessary hardness and ensure higher resistance.
They are 118mm long and thus suitable for many cylinder kits available on the market and the first choice if you need premium quality cylinder studs.
Dimensions:
- M7x118 mm
- Thread length: 18 mm
- Nuts are not included
ATTENTION: not suitable for the 50cc Stage6 cylinders for AM6 / Derbi.
Stud bolts
In simple terms, a stud bolt is a type of bolt with a thread on both ends. One thread is screwed into e.g. the housing, the other thread is used to fasten another component.
There are many bolts and studs with many different functions in an engine. Studs are screwed into a cast piece and another part is attached to it by securing it with a nut.
Useful note: It is advisable not to use threadlocker. To install studs, the "nut / locknut" method must be used (a nut locked against another nut allows the stud to be pulled into the desired part).
If you have the manufacturer's information, you can tighten the studs to the recommended torque.
Stud Bolts in our store:
In our store you will find mainly cylinder studs and exhaust studs for scooters, 50cc motorcycles and motocross machines.
Make sure you choose the right stud bolts for your vehicle by selecting the right model in the configurator or by measuring the pitch and length of the studs.