Intake Kit PWK 28mm V2 Motoforce Racing Derbi / AM6
Description
Racing intake AM6 and Derbi
Complete Motoforce Racing intake kit for tuned 50cc motorcycles with Derbi or Minarelli AM6 engine (70 - 80 cc racing setups).
The 28mm intake system includes:
- Racing carburetor PWK 28mm, charcoal - orange
- Intake manifold AM6 / Derbi
- Reed valveAM6 / Derbi
- Air filter PWK D. 50mm, orange
Advantage of complete system vs. individual components
We've put together this package to save you time and headaches when tuning your intake system. This pack allows upgrading the intake system of your two-wheeler in one go and improve its performance noticeably. The components fit together perfectly, so you don't have to worry about fitments, mount and you're ready to go.
Performance 28mm intake kit
The installation of a larger carburetor, in this case a PWK 28mm carburetor, is recommended for tuning projects of all kinds. PWK carburetors are tuning carburetors that are primarily intended for racing and therefore do not have a vacuum / oil port.
The carburetor is equipped with a fuel inlet, a chrome-plated flat slide, a Powerjet jet, a large float chamber and a lever choke. The V2 version has an charcoal carburettor body with orange anodized CNC aluminium cover and orange anodized float chamber screw.
The intake kit with 28mm carburetor is generally suitable for 70 - 80 cc racing setups.
High-quality intake components for maximum performance
The performance of the carburetor is supported and optimized by other suitable add-on parts:
Motoforce Racing air filter 50mm: This pod air filter will optimize the air supply so the cylinder filling is better, so that your tuning cylinder develop its full potential.
MotoForce Racing intake manifold PWK: The MotoForce Racing intake manifold is made of hard rubber and has four elongated holes for perfect installation on Minarelli AM6 and Derbi engines. This vulcanized rubber is resistant to hydrocarbons and provides an excellent seal for the intake tract. A reinforcement is fitted to the back of the intake manifold to support the weight of the PWK carburetor.
Motoforce Racing Evo reed valve with 4 reed petals: This reed valve has been specially developed for plug & play installation in AM6 and Derbi engines, with no modifications required thanks to the use of slotted holes. The "V" design and the Venturi stuffer optimize cylinder filling and thus improve throttle response. Supplied with 2 paper gaskets.
Intake Kit for scooter, motorcycle and moped
The intake on a 2-stroke engine is composed of a series of parts that connect the carburetor or injection unit to the engine. The aim here is to assemble the components in such a way that it leads to a better cylinder filling.
The intake system of a 2-stroke scooter or motorcycle consists of:
- Intake manifold
- Reed valve
- Sometimes with spacer / socket
What is the benefit of a tuning intake kit?
Generally, installing an optimized intake results in a straighter intake to the engine and increased intake volume to improve mixture flow and engine filling. The reed petals are usually made of fiber or carbon, which improve engine response and peak power.
Note: Installing an intake kit is often necessary when installing a larger carburetor as well as when using a sport air filter. Always remember to check carburetor settings and make sure the system is fully sealed.
| Intake Kit PWK 28mm V2 Motoforce Racing Derbi / AM6 | |
|---|---|
| Article no. | MS-PKMINTAKE02 |
| Weight | 0,68 kg |
| Brand | MotoForce Racing |
| Product type | Intake kit |
| Carburator type | PWK |
| Diameter carburetor | 28mm |
| Intake material | Rubber |
