Drive Belt Stage6 R/T Oversize CVT Minarelli long
Description
Oversize v-belt Stage6 R/T Minarelli
Stage6 R/T Racing Drive Belt Oversize, reinforced racing drive belt for oversize variators. Developed for the Stage6 Oversize CVT, but also suitable for overrange torque drivers / variators by other renowned manufacturers (for example the Malossi Overrange).
The belt is reinforced with polyamide fibres. Power transmission / performance are excellent, the belts' unique compound make for very good grip. No matter if you want to go drag or circuit racing or simply want to upgrade your tuned engine, this belt is a fantastic option.
For long Minarelli engines (MBK Nitro, Yamaha Aerox, MBK Booster, Yamaha Bw's, MBK Stunt, etc.).
w=17.8mm / h=10.6mm / l=775mm; angle 30°
When to change the V-belt?
On scooters, the engine power is transmitted to the rear wheel via the V-belt or drive belt, which connects the CVT variator to the torque drive. As a rule, it should be replaced every 10,000 to 20,000 km. The belt slips when it is heavily worn. By the way, a new belt also slips and needs a short run-in period.
How to change the drive belt?
Replacing the V-belt is a relatively easy, you don't need advanced technical know-how. The first step is to remove the variator cover to get to the variator. You'll need a piston stopper and a blocking tool to remove the CVT and clutch bell. You can then remove the worn V-belt and replace it with the new one. When reassembling, make sure that the V-belt is properly seated and has the correct tension.
Here's a little tutorial on How to change the CVT and drive belt (English Subs).
Drive Belt Stage6 R/T Oversize CVT Minarelli long | |
---|---|
Article no. | S6-5916627 |
EAN | 4051272255250 |
Weight | 0,15 kg |
Series | R/T |
Brand | Stage6 R/T |
Product type | V-belt |
Range | Oversize |
JE RECOMMANDE