Description
Polini Original Speed Clutch 3G for Minarelli 105mm
The Speed Clutch from Polini for scooters with first-generation Minarelli engines (with 105mm clutch diameter).
The clutch is robust and solid, with 3 large, heat-resistant linings for extra good grip. Due to the changed engagement point, the engine can rev up to a slightly higher rpm before the the clutch engages and connects to the transmission. This is particularly noticeable when starting uphill and at traffic lights, and when driving with a passenger.
The clutch is not adjustable separately, but is supplied with 3 sets of springs for optimum adjustment.
- For 50cc scooters with Minarelli engine
- Diameter: 105mm
- Weight: 616g
Scooter clutch
The clutch is essential for the smooth operation of the scooter's automatic CVT. It ensures that the engine power is transmitted to the rear wheel in a continuous and controlled manner.
How Does a scooter clutch work?
The clutch and clutch bell of the centrifugal clutch on scooters form a single unit. The clutch bell is attached to the input shaft of the engine. When the engine reaches a certain speed, the clutch shoes with linings are pulled outward by centrifugal force. Clutch and bell come into contact, they engage so power can be transmitted from the engine to the rear wheel.
How to adjust a Scooter clutch?
Scooters are centrifugal clutches, with increasing RPMs the centrifugal force leads to clutch engagement. The clutch springs play an important role in this process as they affect the engine speed at which the clutch engages, i.e. makes contact with the bell.
The clutch engages at a lower engine speed with soft springs, while hard springs delay clutch engagement. It is important to find the optimum compromise in terms of setup and intended use.
More precise settings can be done with an adjustable clutch, where the tension of the clutch springs can be adjusted.
We carry a wide range of special tools for hassle-free assembly and disassembly of clutch and transmission parts.