Drive Belt Hutchinson standard 806x14.0x8mm MBK 51
Description
Since worn drive belts negatively affect performance, they have to be replaced on a regular basis. This is a standard drive belt for MBK 51 mopeds. It is basically identical to the original belt, simply swap, and your transmission is as good as new.
- measurements: 806 x 14 x 8mm
- type: smooth / wrapped
When to change the V-belt?
On scooters, the engine power is transmitted to the rear wheel via the V-belt or drive belt, which connects the CVT variator to the torque drive. As a rule, it should be replaced every 10,000 to 20,000 km. The belt slips when it is heavily worn. By the way, a new belt also slips and needs a short run-in period.
How to change the drive belt?
Replacing the V-belt is a relatively easy, you don't need advanced technical know-how. The first step is to remove the variator cover to get to the variator. You'll need a piston stopper and a blocking tool to remove the CVT and clutch bell. You can then remove the worn V-belt and replace it with the new one. When reassembling, make sure that the V-belt is properly seated and has the correct tension.
Here's a little tutorial on How to change the CVT and drive belt (English Subs).
| Drive Belt Hutchinson standard 806x14.0x8mm MBK 51 | |
|---|---|
| Article no. | CGN497139 |
| EAN | 3248382005863 |
| Weight | 0,20 kg |
| Brand | Hutchinson |
| Product type | V-belt |