Description
front brake pump rieju mrt 50
Original spare part Rieju
Original spare part from Rieju: Brake pump / brake master cylinder original Rieju MRT 50cc. This original brake pump fits handlebars with 22mm diameter (standard). As this is a spare part from the manufacturer, it can be replaced without any adjustments.
technical data Rieju brake cylinder:
- Inner diameter: 22mm
- Banjo connection: 10mm thread 10x100mm
- Thread diameter: 8mm
- Compatibility: Rieju RR / MRX / SMX / MRT 2005
Brake pump
The brake pump or brake master cylinder is directly connected to the brake, i.e. this is where the pressure is transmitted to the brake caliper when you press the brake lever or brake pedal.
If the brake pump is defective, this is not necessarily noticeable by leaking brake fluid, but by the fact that the brake becomes spongy and soft, which significantly reduces the braking performance.
How to Overhaul a brake pump
For inexpensive brake cylinder repairs, we carry repair kits that include gaskets and all the necessary materials for overhauling and repairing the master cylinder.
You will need to completely disassemble the brake cylinder, disconnect it from the brake hose and remove all clips, snap rings and bolts to remove the seals.
If you can't find a repair kit that fits your model, or if overhauling is too much work for you, you can also buy a complete brake master cylidner in OEM quality, a universal brake pump, or even a racing brake cylinder.
Changing the brake pump
To remove the brake pump, simply disconnect it from the brake line by removing the banjo bolt.
Do not lose the copper washers (and while you're at it check them and replace them if necessary) in order to reattach them later on both sides of the banjo bolt.
Then open the reservoir, fill it with brake fluid and bleed the system.
Brake Master Cylinder Rieju MRT 50cc | |
---|---|
Article no. | OE-RIE8208012 |
Weight | 0,30 kg |
Brand | Rieju |
Product type | Brake pump |