Description
Brake disk rear wheel MRT 200mm
Replacement part for the original brake disc: Brake disc 200mm for Rieju MRT, MRX, SMX and many other 50cc motorbikes.
The OEM quality brake rotor is fitted to the rear wheel instead of the original disk without any modification. When fitting a new brake disc, we recommend that you also replace the brake pads.
Details Rieju MRT brake Rotor:
- Outer diameter: 200 mm
- Inner diameter: 62 mm
- Number of holes: 3
- Thickness: 4 mm
- Rear brake disc
Note: It is not always possible to determine 100% whether the rotor will fit a specific model, as there may be differences depending on the model and year of manufacture. We recommend comparing the specified dimensions with the disc currently fitted on the wheel.
Motorcycle and scooter brake disk
The brake disc on the front wheel and / or rear wheel play an essential role in the braking system of motorcycles and scooters.
Brake rotors are firmly attached to the wheel or wheel hub with brake bolts. They work in conjunction with the brake pads, which are pressed onto the brake discs via the brake caliper. This pressure creates the friction that is important for braking, which allows the vehicle to slow down and come to a stop.
When to change the brake rotor?
Brake pads wear out faster than brake discs and need to be replaced regularly. Brake discs, on the other hand, can last between 20,000 and 40,000 kilometers, depending on driving conditions. It is recommended that you monitor brake pad wear and inspect brake rotors for signs of excessive wear or deformation. If you see any sign of damage, the brake disc should be replaced.
No matter if standard, wave or floating - when you install a new brake disc on your scooter or motorcycle, you should also replace the brake pads at the same time. You should securely fasten front or rear brake disc with threadlocker.
| Brake Disc rear 200mm Rieju MRT | |
|---|---|
| Article no. | MF44.18810 |
| EAN | 4051272026089 |
| Weight | 0,65 kg |
| Brand | MotoForce |
| Product type | Brake disc |
| Brake material | Steel |
| Outside diameter | 200 mm |
| Inside diameter | 62 mm |
| Homologation | No ECE R90 standard |