Brake Cylinder front Rieju MRT
incl. tax, plus shipping
Description
Brake cylinder Rieju MRT 50 Euro 4
Hydraulic brake pump complete with lever for 50cc motorcycles such as Peugeot XPS, XP7, NK7, MH50, Rieju MRX, MRT, Tango, RS3, Sherco and many more.
OEM style, i.e. the part is basically identical to the original and can therefore be fitted without modifications.
Technical data front brake pump Rieju MRT 50cc
- Position: Front (right side)
- Inner diameter: 22mm
- Banjo bolt: 10mm thread (10x100mm)
- Thread diameter for rear view mirror: 8mm (M8)
- Color: Silver
- OEM Ref. No.:0/000.820.8012
- Compatibility: RIEJU 50 RR / MRX / SMX / MRT, Peugeot XPS / XP7 / NK7 / MH50 and Rieju MRX, MRT Tango, RS3 and Sherco. The complete list of available models can be found on the page.
Pro tip: When installing it is important to replace the brake fluid, banjo seals, and bleed the air from the system to ensure optimum performance.
Brake pump
The brake pump or brake master cylinder is directly connected to the brake, i.e. this is where the pressure is transmitted to the brake caliper when you press the brake lever or brake pedal.
If the brake pump is defective, this is not necessarily noticeable by leaking brake fluid, but by the fact that the brake becomes spongy and soft, which significantly reduces the braking performance.
How to Overhaul a brake pump
For inexpensive brake cylinder repairs, we carry repair kits that include gaskets and all the necessary materials for overhauling and repairing the master cylinder.
You will need to completely disassemble the brake cylinder, disconnect it from the brake hose and remove all clips, snap rings and bolts to remove the seals.
If you can't find a repair kit that fits your model, or if overhauling is too much work for you, you can also buy a complete brake master cylidner in OEM quality, a universal brake pump, or even a racing brake cylinder.
Changing the brake pump
To remove the brake pump, simply disconnect it from the brake line by removing the banjo bolt.
Do not lose the copper washers (and while you're at it check them and replace them if necessary) in order to reattach them later on both sides of the banjo bolt.
Then open the reservoir, fill it with brake fluid and bleed the system.
| Brake Cylinder front Rieju MRT | |
|---|---|
| Article no. | MF45.00120 |
| EAN | 7421082061520 |
| Weight | 0,31 kg |
| Brand | Standard Parts |
| Product type | Brake pump |