Height Adjustment seat 40mm Derbi Senda
Description
For shorter riders and teens, the seat of the current Aprilia RX and SX Factory and Derbi Senda Limited mopeds is a little too high. This Height Adjustment seat 40mm Derbi Senda is a lever / arm that allows lowering the seat on various Derbi Senda Limited and Aprilia RS/ SX 50 Factory models by 40mm. It is easy to install, plug & play replacement for original pivot lever of the shock absorber. Road handling and steering is not affected, and there are no additional modifications required. The piece comes with an impact-resistant KTL coating; bearing and seals are included.
- seat adjustment - 4cm
Shock absorber Jack Up Kits
On 50cc scooters and motorcycle, the shock is often raised for aesthetic reasons. However, extending shock length does not only affect seat height and looks of your vehicle.
Advantages of height extensions
Raising the rear of a two-wheeler without changing the front suspension changes the vehicle geometry and thus also performance and handling.
If the rear end is higher than the front wheel, the result is a more closed caster angle. As a result, maneuverability in curves becomes better, but stability at high speeds is reduced.
For motorcycles and motocross bikes, there are lowering kits for both the rear and the front wheel. At the rear, the linkage is replaced, and at the front, spring seats and spacers in the fork must be replaced.
On many models, of course, you can also replace the entire shock absorber to change the length and spring travel.
How to install a shock riser
| Height Adjustment seat 40mm Derbi Senda | |
|---|---|
| Article no. | MF88.88700 |
| EAN | 4057237598905 |
| Weight | 0,39 kg |
| Brand | Standard Parts |
| Product type | Riser kit |
| Position | Rear |
| Colour | Black |
| Colour version | Black |