Description
Silencer Wool (20x25cm).
Silencer wool is put into the silencer to absorb the noise generated by the exhaust. As it loses its sound-absorbing properties over time, it has to be replaced with new packing material as soon as you notice that your exhaust is getting louder.
Please make sure that the wool is not wound too tightly, but is loosely fitted so that the insulating properties can unfold properly.
Silencer packing is packed into the muffler to reduce noise emissions. There are basically two types of packing material: rock wool and glass wool. Their insulating properties play an essential role in keeping the noise level at the legally required level to avoid fines.
When is it necessary to replace the silencer packing?
Over time and with heavy use, silencer packing can wear out and lose its effectiveness. If you notice that the exhaust is getting louder and louder, it's time to replace the packing.
How to replace silencer packing?
Replacing the wool or mats in the muffler may seem complicated, but you can easily do it yourself.
- Before you start, the vehicle must be completely cooled down.
- Using suitable tools, remove all screws, clamps and clips that secure the muffler. Remove the old packing.
- Cut the new mats to size and pack it into the silencer. Make sure the packing is evenly distributed inside the muffler, lightly compress to achieve a tight fit.
- Reinstall the silencer on the vehicle, tighten all screws.
| Silencer Wool ceramic 20x25cm | |
|---|---|
| Article no. | MF94.002 |
| EAN | 4051272005503 |
| Weight | 0,11 kg |
| Brand | MotoForce |
| Product type | Silencer wool |
| Homologation | Yes |
- Yasuni
Silencer Packing Wool Yasuni15,50 €In stock - Stage6
Silencer Wool Stage6 Super Silent (150g)17,00 €170,00 € / 1000 grIn stockRRP17,50 €-3% Discount - MotoForce
Silencer Packing 30 x 25cm8,00 €In stock - RMS
Exhaust packing wool RMS, wrapped ready for insertion, l=300mm, d=80mm5,60 €In stock