Description
Metrakit piston, Ø39.88mm Derbi Euro2 / Euro3.
Metrakit manufactures high quality racing products for 50cc scooters and bikes.
The piston with piston ring(s), piston pin and locking clips is the moving heart of the cylinder. Due to the constant up and down movement, the piston is subject to wear. At some point, the tolerances are no longer correct, the piston ring no longer seals perfectly and the performance decreases, i.e. the piston must be replaced.
Technical details:
- Displacement: 50cc
- Bore: 40 mm
- Stroke: Original
- Piston pin: 12 mm
When to replace the piston?
To find out when the piston on your motorcycle, scooter or moped needs to be replaced, it's best to check your bike's manual. You can also keep an eye out for certain symptoms such as loss of compression, loss of power or oil consumption (only for a four-stroke piston).
Extending Piston life
To extend the life of the piston and reduce cylinder wear, it is recommended that you replace the piston rings on an alternating basis. This method maximizes piston life and improves engine performance.
It is important that you replace cylinder gaskets and piston circlips each time you disassemble the cylinder and piston. Failure to do so can result in oil leaks and engine damage.
Tuning Level: Racing
We categorize our products into different performance levels Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.
Racing products are designed for a more extreme uses and are developed primarily for racing. Whether you stay at 50cc or increase the displacement, the corresponding Racing parts produce much higher performance than the original parts in order to achieve maximum power.
Aluminium cylinders
Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.
How to run in an aluminium cylinder?
Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.
Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.