Skip to content
Scooter
50cc Bike
Moped
Motocross
m3412931_m3411695.jpg
Malossi
Article no.: M3412931

Piston Malossi MHR 70cc d=47mm / 2 piston rings / piston pin=12mm

74,50 €

incl. tax, plus shipping

Availability:
In stock
Dispatch:
Immediate
Attention!

You did not select a vehicle.
You still want to buy this item?

Attention!

Note: The product does not match the selected vehicle model. Continue anyway? 

You'll get 74 reward points
Share product

Description

Piston Malossi MHR Replica 70cc, Peugeot horizontal, 12mm piston pin.

Malossi, manufacturer of high quality tuning parts for scooters, mopeds & Co, is an integral part of the 50cc scooter scene and racing. Constant innovations and consistent first-class quality have made Malossi a must-have for tuning fans.

For almost all cylinders there are also the matching pistons, so that you do not have to immediately replace your entire cylinder when signs of wear and resulting loss of power.

Technical details:

  • Tuning level: Sport, Racing
  • Material: Aluminum
  • Displacement: 70cc
  • Bore: 47 mm
  • Stroke: Original
  • Piston pin: 12 mm
  • Connecting rod: Original
  • Homologation: ECE Homologation
Questions about the product
 
 
Manufacturer's Details
Malossi
Via Roma 118
40012 Caldarera di Reno
Italy
https://www.malossistore.com/en/it/Contatto
Notes and Safety

When to replace the piston?

To find out when the piston on your motorcycle, scooter or moped needs to be replaced, it's best to check your bike's manual. You can also keep an eye out for certain symptoms such as loss of compression, loss of power or oil consumption (only for a four-stroke piston).

Extending Piston life

To extend the life of the piston and reduce cylinder wear, it is recommended that you replace the piston rings on an alternating basis. This method maximizes piston life and improves engine performance.

It is important that you replace cylinder gaskets and piston circlips each time you disassemble the cylinder and piston. Failure to do so can result in oil leaks and engine damage.

product tuning range sport icon

Tuning Level: Sport

We categorize our products into different performance levels  Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.

The products listed under Sport yield better performance than Original parts. They may have technical differences, such as the use of higher quality materials, a larger displacement or a performance-enhancing design. They are suitable for everyday use and have a long service life.

product tuning range racing icon

Tuning Level: Racing

We categorize our products into different performance levels  Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.

Racing products are designed for a more extreme uses and are developed primarily for racing. Whether you stay at 50cc or increase the displacement, the corresponding Racing parts produce much higher performance than the original parts in order to achieve maximum power.

Aluminium cylinders

Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.

How to run in an aluminium cylinder?

Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.

Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.

Technical details
Piston Malossi MHR 70cc d=47mm / 2 piston rings / piston pin=12mm
Article no.M3412931
Weight0,10 kg
SeriesMHR Replica
BrandMalossi
Product typePiston
Tuning levelSport, Racing
Displacement70cc
HomologationYes
Piston pin12 mm
Cylinder materialAluminium
Bore47 mm
StrokeOriginal
Conrod lengthStandard
Customer reviews
Be the first to review this product!
Write a review
Shopping cart

JavaScript ist in Ihrem Browser deaktiviert.
Bitte aktivieren Sie JavaScript um unseren Webshop nutzen zu können und laden diese Seite erneut.

Back to top
Categories
Products