Description
flywheel puller 50 - 250 ccm
Universal three-point puller for the ignition rotor. To carry out work on the ignition or any components underneath such as the crankshaft or bearings, you need a flywheel puller. The tool is relatively universal and can be used for several rotor types.
tip for rotor removal with 3-point puller
The 3-bolt flywheel puller is screwed into the rotor and tensioned with the clamping screw. If there is not enough pressure to loosen the rotor, you can help by carefully tapping the clamping screw with a hammer. The rotor puller from Motoforce has 3 bolts (in contrast to conventional 2-bolt pullers) in order to build up even pressure.
Specifications 3-bolt rotor puller
- Bolt spacing: 38mm
- Outer diameter: 64mm
- Suitable for most 2-stroke engines. The flywheel should have at least 3 threads, please check.
- Suitable for Minarelli, Morini, CPI / 2-stroke China engines and Aprilia / Suzuki engines.
Pullers - The Must have tool for every workshop
Bearing pullers and flywheel pullers are among the indispensable tools of tuners and mechanics. These tools make it easy to remove stuck parts.
Bearing puller
The bearing puller is specially designed to remove bearings gently and without damaging the surrounding parts. It provides a reliable solution for delicate maintenance tasks. There are different types of bearing pullers, depending on the size and type of bearing to be pulled off.
flyWheel Puller
Flywheel pullers are used to pull off the flywheel (also called rotor) of alternators. This tool can be used to safely remove the flywheel, which can get stuck on the crankshaft shaft, without damaging it. There are a variety of sizes and pitches of pole wheel pullers.
Wheel hub puller
Wheel hub puller, also known as claw puller (2 or 3 claws), is a versatile tool for effective removal of parts of various shapes that may be stuck on an axle. There are a variety of wheel hub pullers that differ in size and type of parts to be disassembled.