Description
Note that you'll have to sand your exhaust to remove all rust particles and clean it before painting. For optimum results and protection, apply 2 to 3 coats of paint.
Heat-resistant up to 600°C.
Spray Paints
Although our spray paints are mostly universal paints that can be used on all surfaces, there are also special paints for rims, for parts exposed to extreme heat, rust protection paints, etc. In all cases, the surface must be properly prepared before applying the spray paint.
Painting with spray Paint
Preparation
- Before the new paint is applied, you must sand the surface! The surface cannot be smooth and shiny, but has to be relatively rough, so that the paint adheres well.
- Also make sure that the surface is degreased. Use a strong grease-dissolving product like brake cleaner.
- Cover the areas you don't want to paint with masking tape; it's best to mask generously.
- To make the paint look as specified and even, you should also apply a coat of primer. Make sure that the primer matches the material: For plastic parts, use a special plastic primer.
- Apply the primer in a dry and dust-free place.
Painting
- Read the instructions on the spray can carefully. You will usually find useful information, such as the distance from which to spray, the recommended temperature range, etc....
- It is best to spray in a dry, dust-free and ventilated place.
- Apply several coats to get an intense and even color. Tip: Apply thin coats and be sure to follow the drying times to avoid running!
Finishing
For a perfect finish, you can also apply a layer of clear coat, gloss or matte depending on the look you prefer.
Again, make sure you choose the right type of paint: For example, if you used acrylic paint, you'll need an acrylic clear coat. For components that are exposed to high temperatures, you will need heat-resistant high-temperature paint.
Paint care
To ensure that your paint job stays clean and shiny, you should store your vehicle in the shade in the summer and dry in the winter.
Storing it in a garage will protect the paint from aggressive UV rays and the elements. Alternatively, you can also use a bike cover or mobile garage.
Always clean your scooter, moped or motorcycle with suitable cleaning agents and soft, clean sponges, brushes and cloths. You can also use paint protection to keep the fairing clean and shiny.
If a simple cleaning is no longer enough to bring the surfaces back to a high gloss, you can use paint polish to refresh the colours.
1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Aerosol - 1 - H222-H229 Extremely flammable aerosol. Pressurized container: may burst if heated.
STOT RE - 2 - H373 May cause damage to organs through prolonged or repeated exposure.
Skin Irrit. - 2 - H315 Causes skin irritation.
Eye Irrit. - 2 - H319 Causes severe eye irritation.
STOT SE - 3 - H336 May cause drowsiness and dizziness.
Asp. Tox. - 1 - H304 May be fatal if swallowed and enters airways.
Aquatic Chronic - 3 - H412 Harmful to aquatic life with long lasting effects.
2 Label elements
Labelling according to Regulation (EC) No 1272/2008
The product is classified and labeled according to the CLP Regulation.
Hazard pictograms
GHS02 GHS07 GHS08
Signal word: Danger
Hazard-determining components of labeling: xylene (mixture of isomers), acetone, hydrocarbons, C9, aromatics
Hazard statements
H222-H229 Extremely flammable aerosol. Container is pressurized: may burst if heated.
H315 Causes skin irritation.
H319 Causes severe eye irritation.
H336 May cause drowsiness and dizziness.
H373 May cause damage to organs through prolonged or repeated exposure.
H412 Harmful to aquatic life with long lasting effects.
Safety advice
P101 If medical advice is needed, have container or label at hand.
P102 Keep out of the reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe vapour/aerosol.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue to rinse.
P312 If you feel unwell, call a POISON CENTER/doctor.
P405 Keep locked up.
P410+P412 Protect from sunlight. Do not expose to temperatures above 50 °C/122 °F.
P501 Dispose of contents/container to hazardous waste collection point.
Additional information:
EUH208 Contains 2-butanone oxime. May cause allergic reactions.
Formation of explosive mixtures possible without adequate ventilation.
3 Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
| Exhaust Paint Spray heat-resistant matte black 400ml | |
|---|---|
| Article no. | MF02.004 |
| EAN | 8005361327980 |
| Weight | 0,44 kg |
| Finish | Matte |
| Paint type | High temperature paint |
| Brand | MotoForce |
| Product type | Spray paints |
| Colour | Black |
| Colour version | black matte |