Description
Stage6 Pro Belt scooter V-belt GY6 4-stroke 10"
Reinforced Stage6 Pro Belt V-belt for GY6 4-stroke scooters with 10 inch wheels.
Stage6 Pro Belt - optimized power transmission
The use of high-quality materials ensures excellent grip and a long service life. The optimized grip leads to improved transmission of power. The reinforced belt was developed according to very strict requirements focusing on optimum power transmission, making this belt one of the best performing belts on the market.
The Stage6 Pro Belt is also highly recommended when using a tuning CVT or a tuning exhaust, but can also be used simply if you want to replace the original belt on your scooter with a reinforced version.
Details of the Stage6 drive belt GY6 scooter:
- Reinforced V-belt
- Length: 669 mm
- Width: 17.6 mm
- Height: 8.5 mm
- Angle: 28 °
- Suitable for Chinese 4-stroke scooters with 10" wheels
When to change the V-belt?
On scooters, the engine power is transmitted to the rear wheel via the V-belt or drive belt, which connects the CVT variator to the torque drive. As a rule, it should be replaced every 10,000 to 20,000 km. The belt slips when it is heavily worn. By the way, a new belt also slips and needs a short run-in period.
How to change the drive belt?
Replacing the V-belt is a relatively easy, you don't need advanced technical know-how. The first step is to remove the variator cover to get to the variator. You'll need a piston stopper and a blocking tool to remove the CVT and clutch bell. You can then remove the worn V-belt and replace it with the new one. When reassembling, make sure that the V-belt is properly seated and has the correct tension.
Here's a little tutorial on How to change the CVT and drive belt (English Subs).