Description
V-belt gilera runner 180ccm
For many scooter models we offer very good, stable and cheap replacement V-belts, which are just as good as HQ belts from other well-known manufacturers. This is a V-belt for 180cc 2-stroke maxi scooters like Gilera Runner FXR 180 and Italjet Dragster.
- V-belt in standard quality
- Width = 22mm
- Length = 834mm
When to change the V-belt?
On scooters, the engine power is transmitted to the rear wheel via the V-belt or drive belt, which connects the CVT variator to the torque drive. As a rule, it should be replaced every 10,000 to 20,000 km. The belt slips when it is heavily worn. By the way, a new belt also slips and needs a short run-in period.
How to change the drive belt?
Replacing the V-belt is a relatively easy, you don't need advanced technical know-how. The first step is to remove the variator cover to get to the variator. You'll need a piston stopper and a blocking tool to remove the CVT and clutch bell. You can then remove the worn V-belt and replace it with the new one. When reassembling, make sure that the V-belt is properly seated and has the correct tension.
Here's a little tutorial on How to change the CVT and drive belt (English Subs).
