Description
Cylinder kit Airsal T6 Racing 50cc Peugeot 103 AC
From the Spanish aluminum cylinder specialist Airsal: Cylinder Airsal 50cc T6 Racing d.40mm Peugeot 103 AC The Nikasil-coated 50cc aluminum cylinder (40mm) was specially developed for air-cooled Peugeot 103 mopeds.
In terms of performance, this cylinder is in the lower sports range, perfectly suited for road use (displacement = 49.9cc). Pull and power are very decent, especially in the mid-range; the longer timing increases the top speed a little.
Note: The set is supplied without cylinder head. The original cylinder head can still be used.
With road approval.
Setup tip Airsal Peugeot 103 :
To fully exploit the cylinder's performance, we recommend combining it with a carburetor with a diameter of at least 15 mm and a sports exhaust.
Details Airsal T6 Racing 50cc Peugeot 103 AC
- Nikasil-coated aluminum cylinder
- 6 transfer ports, oval exhaust
- 1-ring piston, 12mm piston pin
- Displacement 49.9cc
How to Install a cylinder on a scooter, motorcycle or moped
The cylinder or cylinder kit is the heart of the engine on scooters, motorcycles and mopeds. It consists of a cylinder, a piston with piston ring(s), a cylinder head and gaskets needed for installation.
The service life of a cylinder depends on whether it has been fitted correctly.
Tuning Level: Sport
We categorize our products into different performance levels Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.
The products listed under Sport yield better performance than Original parts. They may have technical differences, such as the use of higher quality materials, a larger displacement or a performance-enhancing design. They are suitable for everyday use and have a long service life.
Aluminium cylinders
Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.
How to run in an aluminium cylinder?
Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.
Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.