Description
chain with sprockets for Sherco 50
Chain Kit aluminium black 13x53 - 428 Doppler Sherco 50cc, great looking replacement for original chain and sprockets. Suitable for racing set-ups. The chainring is made of extra lightweight aluminium which will help improve acceleration. The anodized coloured finishing will add a bit of customizing to your wheels.
Features Sherco SE-R / SM-R chain set
- ratio 13 x 53
- rear sprocket 3x2 holes, 110mm
- chain type: 428
- colour: black
- lighter than original
- very robust
ATTENTION: The chain kit fits the following models:
- SHERCO SE-R (50 cc) after 2003
- SHERCO SM-R (50 cc) 2013 to 2017
Not suitable for Sherco 50 from 2017. Please check the diameter and mount of the chainring before ordering.
Complete chain Kit
The chain set includes the main components of the chain drive, which are used to transmit the engine power to the rear wheel. Chain kits consist of the following parts: Front sprocket, rear sprocket and chain. You can buy these parts separately or as a complete chain set.
How can I tell that my chain set needs to be replaced?
There are several signs that may indicate that a chain kit needs to be replaced:
- Metallic rattling
- Worn sprocket teeth
- Loose chain that can no longer be properly adjusted
- Difficulty shifting gears or accelerating
- Signs of rust on the chain or sprockets
It is recommended to regularly check and maintain the condition of the chain kit and replace it if there are visible signs of wear.
gear ratio
The transmission ratio of the chain drive is the ratio between the front and rear sprocket. It is calculated as follows: Number of teeth of rear sprocket / Number of teeth of front sprocket. A low ratio increases speed, a high ratio increases acceleration.
Example: 15-tooth front sprocket and 53-tooth rear sprocket: 53/15 = 3.53 gear ratio
