Carburetor Stage6 R/T with intake manifold VHST



Description
Stage6 R/T Carburetors VHST plus intake manifold (Viton) - flat slide carburettor developed and manufactured by Dell'Orto, exclusively for Stage6.
The black finish adds a classy racing look to the carb. The float bowl is made of aluminium which iis especially advantageous for intake systems that are mounted above the rear wheel as the material is less prone to be worn down than plastic. These VHST flat slide carburetors allow for very precise carb adjustment.
The intake manifold is made of relatively soft rubber that absorbs most of the engine vibrations; the rik of fuel frothing and lean mixtures is minimized.
Recommend for "Racing" and "Hyper Racing" engines. We recommend using an HQ racing reed valve with this carb to get the most out of it.
Available versions:
- 24mm
- 26mm
- 28mm
Carburetor for scooters, motorcycles and mopeds
The smooth operation and optimum power output of your scooter, motorcycle or moped depends, among other things, on the carburetor, whose job is to create the right mixture of air and gasoline.
How the carburetor works
When the rider operates the throttle, the carburetor slide moves upwards, increasing the air flow that is sucked in through the air filter. The carburetor then mixes this air with petrol, creating a combustible mixture. This mixture is fed into the cylinder through the intake manifold and the reed valve.
The carburetor is equipped with jets to adjust the ratio of fuel and air and thus ensure an optimum air-fuel ratio. It is important that you adjust the carburetor settings to the setup of your engine.
Adjusting the Carburetor
Proper carburetor adjustment is critical for optimal engine operation and durability. Depending on the type of air filter, cylinder and exhaust of your setup, you will need to readjust main and pilot jets. To check the correct operation of the carburetor, you can refer to the color of the spark plug:
- White spark plug = too lean
- Black spark plug = too rich
- Brown spark plug = optimal setting
Stage6 R/T Carburetor VHST 24mm with intake manifold | |
---|---|
Article no. | S6-30RT-VHST24/K |
Weight | 0,81 kg |
Series | R/T |
Brand | Stage6 R/T |
Product type | Carburetor |
Carburator type | VHST |
Diameter carburetor | 24mm |
Air filter connection | 49mm |
Manifold connection | 36mm |
Choke | Lever Choke |
Ports | Without vacuum port, Without oil port |
Colour version | Black |
Colour | Black |
Stage6 R/T Carburetor VHST 26mm with intake manifold | |
---|---|
Article no. | S6-30RT-VHST26/K |
Weight | 0,79 kg |
Series | R/T |
Brand | Stage6 R/T |
Product type | Carburetor |
Carburator type | VHST |
Diameter carburetor | 26mm |
Air filter connection | 49mm |
Manifold connection | 36mm |
Choke | Lever Choke |
Ports | Without vacuum port, Without oil port |
Colour version | Black |
Colour | Black |
Stage6 R/T Carburetor VHST 28mm w/ intake manifold | |
---|---|
Article no. | S6-30RT-VHST28/K |
Weight | 0,73 kg |
Series | R/T |
Brand | Stage6 R/T |
Product type | Carburetor |
Carburator type | VHST |
Diameter carburetor | 28mm |
Air filter connection | 49mm |
Manifold connection | 36mm |
Choke | Lever Choke |
Ports | Without vacuum port, Without oil port |
Colour version | Black |
Colour | Black |