Brake Master Cylinder w/ lever universal Voca gold
Description
Brake Fitting Radial Brake Pump + Lever Voca Racing
Universally mountable brake fitting from Voca Racing - Brake master cylinder / brake pump with brake lever.
The brake pump with 17.5mm piston is ideal for use with 4-piston calipers (e.g. from Stage6 R/T or Voca). The CNC-machined armature is characterized by precise pressure point and dosage. The brake feel is improved, no spongy fiddling around, but smooth, accurate braking at the desired time. This makes the braking distance significantly shorter and the riding style sporty and agile.
Ideal for racing use, but can also be used for road use, especially recommended after installing a tuning caliper.
We recommend using braided steel brake lines and DOT 5.1 brake fluid to further optimize braking performance.
Note: originally meant for installation on the right side, but can also be installed on the left side by rotating the reservoir.
- Right side
- Screw thread 10x1.25
- Colour: Gold
Brake pump
The brake pump or brake master cylinder is directly connected to the brake, i.e. this is where the pressure is transmitted to the brake caliper when you press the brake lever or brake pedal.
If the brake pump is defective, this is not necessarily noticeable by leaking brake fluid, but by the fact that the brake becomes spongy and soft, which significantly reduces the braking performance.
How to Overhaul a brake pump
For inexpensive brake cylinder repairs, we carry repair kits that include gaskets and all the necessary materials for overhauling and repairing the master cylinder.
You will need to completely disassemble the brake cylinder, disconnect it from the brake hose and remove all clips, snap rings and bolts to remove the seals.
If you can't find a repair kit that fits your model, or if overhauling is too much work for you, you can also buy a complete brake master cylidner in OEM quality, a universal brake pump, or even a racing brake cylinder.
Changing the brake pump
To remove the brake pump, simply disconnect it from the brake line by removing the banjo bolt.
Do not lose the copper washers (and while you're at it check them and replace them if necessary) in order to reattach them later on both sides of the banjo bolt.
Then open the reservoir, fill it with brake fluid and bleed the system.
| Brake Master Cylinder w/ lever universal Voca gold | |
|---|---|
| Article no. | VCR-RD07BP.GO |
| Weight | 0,20 kg |
| Brand | Voca Racing |
| Product type | Brake pump |